Back to Blog
How-to Guides 2026-11-20 subtel 0 views

SteelSeries Arctis Nova Pro Battery Replacement Guide

SteelSeries Arctis Nova Pro Battery Replacement Guide

Learn how to replace the battery in your SteelSeries Arctis Nova Pro headset with the 82-2-7136898 700mAh replacement. Step-by-step guide and compatibility details.

Which SteelSeries Arctis Nova Pro Battery Fits?

If your SteelSeries Arctis Nova Pro headset no longer holds a charge or drains quickly, the internal battery may need replacement. The compatible replacement is the 82-2-7136898 battery, a 700mAh cell designed for this specific model. This guide walks you through what to check before ordering and how to swap the battery yourself.

The 82-2-7136898 replacement is listed with a 700mAh capacity and fits the SteelSeries Arctis Nova Pro. It is also compatible with the 61527 battery standard. Before you begin, confirm your headset model is exactly the Arctis Nova Pro (not the Pro Wireless or Pro Wired, which may use different batteries).

Battery Specifications at a Glance

Step-by-Step Battery Replacement

Before starting, power off the headset and disconnect any cables. Work on a clean, flat surface with good lighting. You will need a small Phillips screwdriver and a plastic spudger or similar non-conductive tool to open the casing.

  1. 1. Remove the ear cushions: Gently peel off the ear cushions from the ear cups. They are usually held on by a plastic ring or adhesive. Set them aside.
  2. 2. Unscrew the ear cup housing: Under the ear cushions, you will find several small screws. Remove them with a Phillips screwdriver and carefully lift off the outer housing.
  3. 3. Disconnect the old battery: Locate the battery connector on the circuit board. Gently unplug the connector by pulling on the plug, not the wires. Remove the old battery from its compartment.
  4. 4. Install the new battery: Place the 82-2-7136898 replacement battery in the same compartment. Connect the plug to the board, ensuring it clicks into place. Do not force it; the connector should fit snugly.
  5. 5. Reassemble the headset: Replace the ear cup housing and tighten the screws. Reattach the ear cushions. Charge the headset fully before first use.

What the Listing Does Not Confirm

The product listing for the 82-2-7136898 battery does not include detailed installation instructions or safety warnings. While the steps above describe a typical replacement, your specific headset version may have slight differences in disassembly. If you are unsure about any step, consider professional replacement or consult the headset manual.

Also, the listing does not specify the battery chemistry (e.g., Li-ion or Li-Po) or voltage. These details are important for safe charging and handling. If you need exact specifications, check the original battery markings or contact the manufacturer.

Related Articles

Customer Service
Home
Products
Cart
Profile